All About Handyman Services Daily News

Knowing Your Different Levels of Drywall

Aug 26

There are several factors that influence the quality of the finished drywall. The main factors that determine the quality of finished drywall are the framing job and the care taken during installation. If these steps are done successfully, the next challenge will be to tap the joints and finish the product according to your expectations. You should note that, even if a wall is only used as a separator or decorative structure, proper finishing of drywall is necessary. There are five different levels to finish drywall. Each one serves a different purpose. Let's look at them.

Level 1

This temporary construction does not require any finishing or drywall taping. You can also use Level 0 drywall finishing if you aren’t yet sure of its finish.

Level 2

Drywall contractors use level 1, in attics or garages, and any other areas that are not easily accessible by the public. The compound does not cover fasteners, so drywall joints and angles will have tape in their joint compound. The compound can be used in areas such as corridors, where pedestrians are frequent. Additionally, some boards may have tool marks and/or ridges.

Level 3

The joint compound is taped to the interior angles and joints. Any excess compound can be immediately removed to create a thin coat over joints and angles. While you can still see the tool marks and edges, the joint compound also covers accessories and fasteners. When tile substrates are made from a water-resistant material, Level 2 drywall can often be used.

Level3

Level 3 finishes include having the tape embedded into joint compound and wiped off to leave a thin finish over interior angles and joints. The difference is that a layer of joint compound is added to the joints, interior angles and fasteners. Here, there are no tool marks or ridges. The surface is then prepared for decoration.

The Level 3 drywall finish can be used for heavy wall decorations, drywall textures and as a final step. It is not the best finish level for flat residential painting or lightweight wallcoverings.

You can repeat the previous steps here. In other words, tape is applied to the joints and the interior angles. Once the tape has dried, the area must then be wiped clean to avoid leaving a thin coating. The difference is that the joint compound will be applied by the drywall contractor to two coats on flat joints and one on interior angles. Contractors will apply three coats on accessories and fasteners, while all joints will be smoothened. There will also be no tool marks and ridges. The drywall contractor Denver finishes the surface by applying a primer.

This is recommended for light residential wallcoverings, flat paints, and light textures. So, it is essential that all joints are well concealed, and fasteners not exposed under glossy or flat paints or wallcoverings.

5

This is the best drywall finish quality. It conceals imperfections and ensures uniformity. The tape in the joint compound still covers the interior corners and joints. These are quickly wiped off to create a thin coat. Next, two additional coatings of compound will be applied over the flat joints. One coat is then applied over the interior angles. To achieve better results, the accessories and fasteners can be concealed by three coatings. The surface is finally finished with a skim layer of joint compound. This allows for smooth surface and concealment of imperfections. There are naturally no tool marks or lines.

Prior to decorating drywall repair Denver, it must be primed. A primer is necessary to ensure that the fasteners are hidden. The level 5 finish conceals any imperfections and is ideal when wall angle or lighting might reveal flaws.

To sum up. If you don't have the right lighting conditions or want to use flat paints with glossy finishes, you will need a smooth surface. That's level 5. You should choose a higher level drywall finish. Level 5 is not required if you're opting for texturized, commercial painting. But, level 5 is necessary if a flat finish is desired.

 

drywall Denver

 

drywall repair Denver

 

Denver drywall

 

Denver drywall company

 

drywall contractor Denver

 

drywall contractors Denver

 

drywall installation Denver

 

Denver drywall contractors

 

drywall finishing Denver

 

drywallers Denver

 

drywall repair Denver CO

 

drywall contractors Denver CO

 

drywall companies in Denver Colorado

 

drywall contractors Denver Colorado